C3 Replacements + Ionizer Filter (PJ6000 or PJ7000) for Well / Bore Water

From: $171

The 4 filters that are supplied in this pack are (photo slightly different)

PJ6000 Ionizer Filter, For C3 – Carbon Block Filter CT-G30, Granulated Activated Carbon / KDF CT-G60, Granulated Activated Carbon CT-G20

Select options$190
Select options$171 / year
SKU: c3_bore Category:

Description

Included in your pack will be :

Chanson PJ6000 / PJ7000 – Ionizer Filter

Chanson Carbon Block Filter CT-G30 – Removes odor, chlorine, bleaching powder, pesticides and chemical remains

Chanson Granulated Activated Carbon / KDF CT-G60 –  – Removes With removes odor, bad taste, chlorine, bleaches, pesticides and even smaller particles and chemical remains with Superfine absorbability

Chanson Granulated Activated Carbon CT-G20 – Removes With removes odor, bad taste, chlorine, bleaches, pesticides and even smaller particles and chemical remains with Superfine absorbability

The C3 also removes the contaminants without removing healthy minerals and other important properties from the water.

Order of Installation

  1. Carbon Block
  2. GAC/KDF
  3. Granulated Activated Carbon

Important – If your filters are not replaced after 12 months they will break down and effect your water quality, mold and other unwanted contaminants can be released in the water.

The Chanson Water C3 Pre-Filters removes harmful contaminants such as chloramines, lead, arsenic, sulfur, pesticides and nitrates that can cause sickness and health problems over years of ingestion.

The C3 also removes the contaminants without removing healthy minerals and other important properties from the water.

WARNINGS!!

1./ Do not connect the C3  filter to your Ionizer before following the “flush procedure” because the loose carbon will flow into your Ionizer Filter and machine.

2./ It is important that you hold the filter housing with one hand and use the other hand to remove the filter cap. Failure to do so can result in breaking the housing from the unit causing it to leak.

Flush procedure

– Run cold water through the C3 filter for 5 minutes, let stand for 10 minutes and run water for 10 more minutes, then connect to water machine.

– Once you have flushed the C3 filter and attached it to the machine then run the Ionizer for 20 Litres or 10 minutes to flush the new filter in the machine.

Installation Videos

Additional information

Choose Filter

P6000, PJ7000

Reviews

There are no reviews yet.

Be the first to review “C3 Replacements + Ionizer Filter (PJ6000 or PJ7000) for Well / Bore Water”

Your email address will not be published. Required fields are marked *